Product ID:17012 KRYLON INTERIOR ENAMEL METALLIC
MSDS Date:02/04/1987
FSC:8010
NIIN:00D004640
MSDS Number: BYSLM

BORDEN INC/CHEMICAL DIV KRYLON DEPT

630 E WASHINGTON
NORRISTOWN, PA 19404
US

Emergency Phone: 216-292-7400

Info Phone: 800-832-2541

Cage: 87187

SAX ARTS & CRAFTS SUB OF BEATRICE COMPANIES INC

NEW BERLIN, WI 53151 US

Telephone: 262-784-6880

Cage: 26290

ACETONE (SARA 313) (CERCLA)

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 36%

OSHA PEL 1000 PPM

ACGIH TLV: 750PPM/1000STEL;9495

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

PROPANE

CAS: 74-98-6

RTECS: TX2275000

Fraction By Weight: 12-13%

OSHA PEL 1000 PPM

ACGIH TLV: ASPHYXIANT; 9495

ISOBUTANE

CAS: 75-28-5

RTECS: TZ4300000

Fraction By Weight: 16.0%

TOLUENE (SARA 313) (CERCLA)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 10 - 20%

OSHA PEL 200 PPM; Z-2

ACGIH TLV: S, 50 PPM; 9495

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

XYLENES (O-,M-,P- ISOMERS) (SARA 313) (CERCLA)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 17%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM/150STEL;9495

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGESTION NOT EXPECTED TO
HARMFUL UNDER NORMAL CONDITIONS OF USE. INHALATION OF VAPORS/MISTS
MAY CAUSE RESPIRATORY IRRITATION, CNS DEPRESSION, ASPHYXIATION,
LIVER/KIDNEY DAMAGE. CONTACT MAY CAU SE SKIN AND EYE IRRITATION.
CHRONIC:NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NO INGREDIENT OF A CONCENTRATION OF 0.1%
OR GREATER IS LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN.
Effects of Overexposure:INHALED-HEADACHE, DIZZINESS, NAUSEA, VOMITING,
UNCONSCIOUSNESS, CYANOSIS. SKIN-IRRITATION. EYES-IRRITATION.
INGESTED-NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:IN ALL CASES GET MEDICAL ATTENTION. EYES-IMMEDIATELY FLUSH
WITH WATER FOR 15 MINUTES, LIFT LIDS. SKIN-REMOVE CONTAMINATED
CLOTHES. FLUSH WITH LOTS OF WATER. INHALED-REMOVE TO FRESH AIR.
ADMINISTER OXY GEN OR ARTIFICIAL RESPIRATION AS NEEDED. INGESTED-IF
CONSCIOUS, GIVE LOTS OF WATER AND CONTACT POISON CONTROL CENTER OR
EMERGENCY ROOM.

Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM. WATER MAY BE
INEFFECTIVE BUT SHOULD BE USED TO COOL FIRE EXPOSED CONTAINERS.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
FULL PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:EXTREMELY FLAMMABLE. VAPOR MAY IGNITE
EXPLOSIVELY. VAPORS MAY TRAVEL TO DISTANT IGNITION SOURCE AND
FLASHBACK.

Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. SOAK UP
WITH INERT ABSORBENT MATERIAL AND REMOVE TO A CHEMICAL DISPOSAL
AREA. PREVENT ENTRY INTO BODIES OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN A COOL, DRY PLACE BELOW 120F
AND AWAY FROM SOURCES OF IGNITION AND STRONG OXIDIZING AGENTS.
Other Precautions:AVOID CONTACT WITH SKIN AND EYES. AVOID BEATHING
VAPOR OR MIST.

Respiratory Protection:IF ENGINEERING CONTROLS FAIL OR NON-ROUTINE USE
OR AN EMERGENCY OCCURS; WEAR AN MSHA/NIOSH APPROVED RESPIRATOR WITH
ORGANIC VAPOR CARTRIDGE OR AN AIR-SUPPLIED RESPIRATOR OR SCBA, AS
REQUIRED. USE IAW 29 CFR 1910.134.
Ventilation:USE EXPLOSION-PROOF ADEQUATE MECHANICAL VENTILATION OR
LOCAL EXHAUST TO MAINTAIN EXPOSURE BELOW TLV(S).
Protective Gloves:BUTYL, PVA.
Eye Protection:SAFETY GLASSES/CHEMICAL SPLASH GOGGLES.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER. DLA-HMIS:
EYE WASH STATION & SAFETY SHOWER.
Work Hygienic Practices:WASH HANDS AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health
SAX ARTS & CRAFTS PART NUMBER: 317-0099. CONTRACT NUMBER
SP0420-95-PA057.

HCC:V3
Vapor Pres:50 PSIG
Spec Gravity:<1.0
Evaporation Rate & Reference:>1 (N-BUTYL ACETATE=1)
Solubility in Water:SLIGHT
Appearance and Odor:METALLIC LIQUID IN AEROSOL CAN WITH GAS PROPELLANT.
Percent Volatiles by Volume:89

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER. DLA-HMIS: STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER. DLA-HMIS:
AVOID EXPOSURE TO HIGH TEMPERATURES AND STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:OXIDES OF CARBON.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL ENVIRONMENTAL REGULATIONS. EMPTY CONTAINER MAY CONTAIN
EXPLSOIVE VAPORS. DO NOT CUT, PUNCTURE OR WELD ON OR NEARBY.
INCINERATION WILL CAUSE CONTA INER TO BURST VIOLENTLY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.